LOTOS LTP5000D Plasma Cutter, 2024 Upgraded 5/8" 16mm Clean Cut 3/4" 20mm Severance Cut 50A Non-Touch Pilot Arc Plasma Metal Cutter Machine, Plasma Cutting Equipment, Dual Voltage 120V or 240V, Brown

About this item

• ★ 𝟐𝟎𝟐𝟒 𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐝 𝐌𝐨𝐝𝐞𝐥: 5/8-inch (16mm) Clean Cut, 3/4-inch (20mm) Severance Cut, Newly Upgraded PC board, Remarkable 25% Increase in Cutting Power compared to other standard 50-amp plasma cutters.
• ★ 𝐑𝐞𝐦𝐚𝐫𝐤𝐚𝐛𝐥𝐞 𝟐𝟓% 𝐈𝐧𝐜𝐫𝐞𝐚𝐬𝐞 𝐢𝐧 𝐂𝐮𝐭𝐭𝐢𝐧𝐠 𝐏𝐨𝐰𝐞𝐫: Enhanced with 𝐚𝐝𝐝𝐢𝐭𝐢𝐨𝐧𝐚𝐥 𝐈𝐆𝐁𝐓𝐬 on LOTOS 𝐍𝐞𝐰𝐥𝐲 𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐝 𝐏𝐂𝐁 𝐛𝐨𝐚𝐫𝐝 & 𝐓𝐨𝐫𝐜𝐡, delivering a remarkable 25% increase in cutting power output compared to standard 50-amp plasma cutters. The advanced control systems and precision cutting flames of the newly designed torch ensure high-precision cuts with smooth and fine cut lines. Experience faster cutting speeds without compromising accuracy.
• ★ 𝐒𝐚𝐟𝐞 & 𝐚𝐭 𝐋𝐨𝐰 𝐂𝐨𝐬𝐭: Newly designed upgraded torch and consumables guarantee enhanced precision cutting and increased durability, leading to a much longer consumable lifespan. 𝐓𝐡𝐢𝐬 𝐡𝐞𝐥𝐩𝐬 𝐥𝐨𝐰𝐞𝐫 𝐲𝐨𝐮𝐫 𝐨𝐯𝐞𝐫𝐚𝐥𝐥 𝐮𝐬𝐚𝐠𝐞 𝐜𝐨𝐬𝐭𝐬. The compact plasma cutter features a convenient handle for portability, and it utilizes non-hazardous compressed air to effortlessly cut through various materials, including stainless steel, alloy steel, mild steel, copper, and aluminum.
• ★ 𝐄𝐚𝐬𝐲 𝐒𝐞𝐭𝐮𝐩 𝐰𝐢𝐭𝐡𝐢𝐧 𝟏 𝐌𝐢𝐧𝐮𝐭𝐞: The pre-installed NPT 1/4" industry-type D plug and air filter regulator enable seamless connection to your air compressor using the existing stand coupler. Setting up the entire machine is effortless and can be completed within 1 minute. ★ 𝐅𝐫𝐨𝐧𝐭-𝐌𝐨𝐮𝐧𝐭𝐞𝐝 𝐑𝐞𝐠𝐮𝐥𝐚𝐭𝐨𝐫: Emphasize the significance of pressure adjustment for attaining precise cutting. Ensures a 100% Air Leakage-Free Guarantee.
• ★ 𝐍𝐨𝐧-𝐓𝐨𝐮𝐜𝐡 𝐏𝐢𝐥𝐨𝐭 𝐀𝐫𝐜 𝐏𝐥𝐚𝐬𝐦𝐚 𝐂𝐮𝐭𝐭𝐞𝐫: Effortlessly cuts through rough, painted, and rusty surfaces while generating minimal slag. The pilot arc technology enables cutting without direct contact between the tip and the metal, resulting in improved cutting quality and extended consumable lifespan.
• ★ 𝐎𝐮𝐭𝐩𝐮𝐭 & 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞: 10-50A DC output, 5/8” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 3/8" ideal clean cut and 1/2" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
• ★ 𝐎𝐮𝐭𝐩𝐮𝐭 & 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞: 10-50A DC output, 5/8” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 3/8" ideal clean cut and 1/2" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.